Skip to content

Objects

Enter a word or phrase to perform a general search across all records in the Objects catalog. You can also browse records in the catalog without performing a search.

Search Tips
  • Searches are not case sensitive.
  • Searching for multiple words connects them with OR by default. Matching records can contain any of the words.
  • Connect multiple words with AND if you only want to see records containing both words.
  • Use quotation marks to search for a phrase.
  • Place an asterisk (*) at the end of a word as a wildcard.

1253 results found. Records searched: 1253

  1. Woodburning - 2014.015.0001

    Woodburning of Rockpile, Rockpile Museum sign, caboose, hayrake, windmill, and parking lot created by artist Tom Butler of Gillette in 2014. Light colored oak panel with oak frame. Woodburning is likely based on a photograph of the area taken in 2009 or before because the hayrake was moved away from this location in that year.

    Record Type: Object

    Woodburning by Tom Butler 2014
  2. Woodburning - 2021.046.0001

    Woodburning Board as a thank you gift to Nola Wallace on her last day as a Rockpile Museum board member. It contains the old museum logo on the front, as well as two angels (one on each side). "Nola Wallace" is burned onto a piece that is adhered to the board along the top section, and "Rockpile Museum 2011-2017" is burned along the bottom section. Tom Butler's signature is burned into the back on the bottom right corner.

    Record Type: Object

    Nola Wallace Thank You Board
  3. Wrench - 1997.066.0003

    Rod Tong Back Up Wrench, 14 1/4" x 5" imprinted on the wrench " 5/8" BJ 27902) some red paint remains on the wrench used in oil drilling

    Record Type: Object

    Wrench, Rod Tong
  4. Wrench, Allen - 2011.060.0003

    Steel tuning wrench for an 1890 Mackenzie Piano Harp

    Record Type: Object

    Hammered Dulcimer Tuning Wrench
  5. Wrench, Monkey - 1997.048.0036

    15 1/4" x 4 1/8" x 1 3/4", combination monkey and pipe wrench (unique) wrench has a replaceable lower jaw "9,3,3". ADD: Partly wood in the handle, its heavy. It has green stain in the top & rusty. MONKEY WRENCH - nuts & bolts can be turned with smooth parallel jaws of this tool. It has an adjustable jaw which is controlled by a worm gear. It is an adjustable wrench which is rarely used today. It use generally been replaced by the adjustable end w...

    Record Type: Object

    Wrench, Monkey
  6. Wrench, Open-End - 1997.048.0037

    8 1/2" x 2" x 1/4" Open End Combination wrench curved, probably for a Model T Ford. ADD: This is one of the standard double end angle. A wrench is a tool, the English call it a spanner - that is usually operated by hand and is made for tightening or loosening bolts, nuts or anything that need to turn. The physics of a wrench are that the tool works as lever. There notches at the mounth for gripping. The wrench is pulled at a right angle to the...

    Record Type: Object

    Wrench, Open-End
  7. Wrench, Open-End - 2013.001.0016

    Wrench is 7" Long, 3 open ends at one end and a slot at the other end. Monmouth stamped on one side. Blank on the other side.

    Record Type: Object

    Wrench
  8. Wrench, Open-End - 2013.001.0017

    Wrench, open end at one end. The opposite end has bent flat piece with D73G on one side. 5 1/2" long.

    Record Type: Object

    Wrench
  9. Wrench, Open-End - 2013.001.0021

    International Harvester Co. open-end wrench 2T2 at the larger end, On one side letters I.H.CO. and G.3170. and F. Nothing on the other side.11.75" long.

    Record Type: Object

    Wrench
  10. Wrench, Open-End - 2013.001.0024

    Wrench is open at both ends, one end is larger than the other , Deering on one side and Hay Rake on the other side, 6.5" long.

    Record Type: Object

    Wrench
  11. Wrench, Open-End - 2013.001.0025

    Wrench is open-end at both ends, Curved handle is flat on one side with 88 stamped on it, ridge on the other side, hole in the middle.

    Record Type: Object

    Wrench
  12. Wrench, Open-End - 2013.001.0029

    Wrench is open at both ends. Has a Q and a K stamped on one side. 15 3/8" long.

    Record Type: Object

    Wrench
  13. Wrench, Open-End - 2013.001.0030

    Wrench, open end at both ends. NPR stamped on both sides of curved handle, 16" long.

    Record Type: Object

    Wrench
  14. Wrench, Open-End - 2013.001.0031

    Wrench, open at one end, bent handle, 16.25" long.

    Record Type: Object

    Wrench
  15. Wrench, Open-End - 2013.001.0035

    Wrench is 16.25" long, has a 7 on one side and nothing on the other side, with a 2.50" opening at one end and a hole at the other end.

    Record Type: Object

    Wrench
  16. Wrench, Open-End - 2017.070.0154

    This is an open-end wrench made of steel or iron. There is an "H" on one side.

    Record Type: Object

    Wrench, Open-End (side one)
  17. Wrench, Pipe - 2008.004.0244

    26" iron pipe wrench made of two individual handles connected by a bolt and nut. A 4 5/8" long screw inserts into a hole on one handle and turns to adjust the opening of the wrench jaws. A number 3 is stamped on each handle piece.

    Record Type: Object

    Wrench, Pipe
  18. Wrench, Pipe - 2017.070.0157

    This is a steel or iron metal pipe wrench with a wooden handle.

    Record Type: Object

    Wrench, Pipe (right side)
  19. Wrench, Socket - 2008.027.0025

    Model 3240 Walden-Worcester fixed double-socket wrench. This wrench has a handle with a loop at the end. One socket opening is 1/2" and one is 5/8". The object is stamped, "3240 Walden-Worcester, Made in U.S.A."

    Record Type: Object

    Wrench, Socket
  20. Wrench, Socket - 2008.027.0037

    Fixed double-socket wrench. Handle is 8" long. No markings. There is an apparent cut in the handle that left a slight raised 3/8" long lip at that site.

    Record Type: Object

    Wrench, Socket

Thank You!

Confirmation Message Here....